Number of Channels: One.
Frequency Range: 20Hz (-1dB) through 20kHz (-0.5dB), typical with all 1/3 octave filters set at center detents.
Dynamic Range: 109dB
Recommended Operating Level: 0dBu (0.775 volts rms).
Maximum Operating Level: +21dBu into 600 ohms.
Noise: Better than -90dBu (re. 0.775 volts) at unity gain, 20kHz bandwidth. Worst Case.
Distortion: Less than 0.02% THD into 600 ohms, 20kHz bandwidth.
Filter Type: R-C active, single-pole pair.
Filter Control Centers: 28 one-third octave filters on I.S.O. standard frequency centers from 31.5Hz through 16kHz.
Filter Center Frequency Tolerance: ±5%.
Filter Controls: 60mm linear potentiometers with center detents and integral dust covers.
Filter Control Range: ±12dB at center frequency, Detent at 0dB (±0.5dB).
EQ In/Out Switch: Front panel mounted. By-passes 1/3 octave filters only. Silent operation.
|
High-Pass Filter: -3dB point adjustable from 12Hz -240Hz, 12dB/octave response.
Low-Pass Filter: -3dB point adjustable from 40kHz -4kHz, 12dB/octave response.
Gain: 0dB to +20dB. Continuously variable.
Headroom Indicator: 7 LED bargraph display, 3dB resolution.
Connectors: Latching XLR-3 with chassis-grounded shells. Redundant 1/4" TRS.
Input/Output Circuits: Active servo-balanced differential. Can operate unbalanced with no change in dynamic range.
Common Mode Rejection: Greater than 85dB at or below 1kHz and greater than 65dB at 10kHz.
Input Impedance: 50 kilohms, balanced. 25 kilohms, unbalanced.
Output Impedance: 102 ohms, balanced. 51 ohms, unbalanced.
Power Requirements: 90 - 130 / 180 - 260 VAC, 50/50Hz, user selectable on rear panel, 15W. Fuse: 250mA, slow-blow, 1.25".
Mute Relay: Mutes audio on power-up and power-down.
Dimensions and Weight: 3.5" by 19" (rack mount 2RU) by 9.2" 8.9cm by 48.3cm by 23.4cm 7 lbs. - 3.2kg
Finish: Black painted brushed aluminum. White nomenclature.
|